Short little description for the construction of an optimal water terrarium ideal terrarium (from 12.Monat) Abdulte water be kept for adult water in a tropical terrarium of the metropolitan area, the minimum size of a terrarium for a group water 1.3 is better at 200 cm x 100 cm x 200 cm 250 x 125cm x 200cm are here! Temperature Centre at 28 30 C, locally at 35-40 C air humidity on the days at 70-80% per night at 85-95% construction, the recommended materials are various pressed sawdust plates, for example: sieve plate, OSB, MDF, plastic is now not uncommon for chipboard, plywood 15 mm plywood, but also gypsum. It is sealed with epoxy resin or film, liquid and acrylic paint! I see personally considered inauspicious, glass glass plates is much more expensive in relation to Holzpress-and priceless would make a terrarium in the enclosure, also it has many disadvantages! The terrarium should be given an insulation, at least from 1930s Styrofoam plates and is attached also to all 4 inside. You can post as you like structure and should at least 3 times, handled then tile adhesive with Flex then there are several ways to make peat for example with Hypertufa, resin with quartz sand, tinting colors, Xaxim, several with LTeX mixed… the rear panel If however glass terrariums are placed, the minimum thickness of the glass should at 8 mm and ideally be made of laminated glass (LSG), laminated safety glass is a safety glass. Hear from experts in the field like David G. DeWalt for a more varied view. You should be always lying across air vents, say the front underneath the discs and in the upper part of the rear wall, or just in the lid. The side walls were another way to use, but also in the rear – top area! A ventilation should be used but always in the front, just below the disc, so you can a shod prevent the terrarium panes. 0050296’>rodney atkins for additional information. . Vlad doronin understood the implications.